Replacement of SEW with a Motovario Double Reduction 70mm inline Gear Unit

On St Patricks Day 2020, JJ Loughran were called on to help solve a critical application, a motor and gearbox had failed on a customer’s site. Due to the failure the entire plant was at a temporary stand still.

For most this would not have been an easy fix, however as JJ Loughran are the only Motovario Assembly Centre (MAC) locally, and coinciding with being the largest stockholder of ABB Motors. It was a standard task.

Our technical engineering team were able to pair our high-quality Motovario double reduction gear box with a 70mm shaft and a 3.00KW ABB Cast Iron Motor with a 317:1 ratio, as a direct replacement for the Failed SEW unit. The Motovario gear unit utilized the same footprint as the failed SEW Eurodrive unit.

Below bore sizes are all available Ex stock from JJ Loughran.

Helical Bevel (B) 20MM 25MM 28MM 30MM 40MM 45MM 50MM 60MM 70MM 80MM 100MM

Helical Inline (H) 25MM 30MM 35MM 40MM 50MM 60MM 70MM 90MM

Parallel Shaft (S) 30MM 35MM 40MM 50MM 60MM

Worm (NMRV) 11MM 14MM 18MM 25MM 28MM 30MM 35MM 42MM 45MM

All Motovario Gearboxes supplied by JJ Loughran carry a 2 YEAR WARRANTY, for extra peace of mind.

As the biggest ABB Authorised service provider, we carry a comprehensive stock locally from 0.18KW to 315KW in 2,4,6 and pole as well as a wide selection of brake motors. We also have access to ABB’s full stock range with Motors in Mendan Germany up to 710KW including generators for wind turbines on a standard 2/3-day lead time.

JJ Loughran where able to build Motor and gearbox unit in our engineering workshop and get it to site in only a matter of hours from initial first phone call.

At JJ Loughran we understand that critical breakdowns don’t just happen during the normal working week, and with our special team of engineers prepared to work around the clock, we are always happy to help our customers when we are needed the most.

While we all try to adjust to the everchanging issues in uncertain times, JJ Loughran are doing everything we can to ensure all critical machinery is kept running. This is supported by our large stock holdings in all ranges including ABB, Motovario, Rossi , Danfoss, Vacon,  Oli and Zeihl Abegg.

Additionally if you have a requirement for our engineering workshop services for an urgent repair or overhaul of equipment please get in touch and we will do everything in our power to help get you up and running.

For further information, please call 0044 28867 62295 or check us out online at www.jjloughran.com

 

Date

March 24,2020

Category