Helical gear reducers - cast iron
Series: H

Features:

  • Sizes: 030-040-050-060-080-100-125-140
  • Available versions: H - fitted for motor coupling, IH - with input shaft, CH - with compact motor, PH - fitted for motor coupling with flexible joint
  • Cases with feet, flange or universal
  • Power up to 45 kW
  • Gears with shaved or ground profile
  • Gearing with 1, 2 and 3 reduction stages
  • Reduction ratios between 1,23 and 282,1
  • Torque max 8.000 Nm and admissible radial loads max 55.000 N
  • Cases in G200 grey cast iron for high strength and optimized with FEM analysis. Feet, flange or universal mounting
  • Excellent mechanical strength, particularly suitable to support high axial loads and high reliability
  • Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
  • Painted with RAL 5010 blue epoxy-polyester powder

 

Helical gear reducers - aluminium
Series: HA - IHA - CHA

Features:

  • Sizes: A30-A40-A50-A60
  • Available versions: HA - fitted for motor coupling, IHA - with input shaft, CHA - with compact motor
  • Power up to 4,8 kW
  • Gears with shaved or ground profile
  • Gearing with 1, 2 and 3 reduction stages
  • Reduction ratios between 1,3 and 353,98
  • Torque max 500 Nm and admissible radial loads max 8000 N
  • Cases in die-cast aluminium alloy; feet, flange or universal mounting
  • Excellent mechanical strength while being and particularly lightweight
  • Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
  • Painted with RAL 5010 blue epoxy-polyester powder

 

Helical gear reducers - cast iron
Series: RT - RM - RF

Features:

  • Sizes: 040-050-063-080-100-125
  • Available versions: R - fitted for motor coupling, IR - with input shaft
  • Casing with feet T, flange F and with low output shaft centre M
  • Gearing with 1, 2 and 3 reduction stages
  • Reduction ratios between 1,4 and 250
  • Efficiency from 0.96 to 0,985
  • Power from 0,12 up to 30 kW
  • Torque max 3.200 Nm
  • Admissible radial loads max 34.700 N
  • Cases in G200 cast iron for high strength
  • Lubrication with mineral oil
  • Gears hardened and tempered with ground profile
  • Excellent mechanical strength, particularly suitable to support high axial loads and high reliability
  • Painted with RAL 5010 blue epoxy-polyester powder according to DIN 1843

 

Call us on:

+44 (0)28 867 62295

 

Email us:

sales@jjloughran.com